Veto Pro Pac FH-XL Firehouse Cargo Tote Open Topped Heavy Duty Tool Storage Bag

Firehouse Cargo Totes™ Are Heavy Duty, Durable Open Totes Designed To Haul, Store And Organize All Sorts Of Fire Equipment And Gear Used By Firemen On A Daily Basis.

The FH-XL FIREHOUSE CARGO TOTE™ has 40% more cargo storage space than the FH-LC. It offers maximum bulk storage and hauling capacity in a tough, stand-up, durable tote configuration. With our signature 3mm Polypropylene bottom, this tote excels at hauling, storing and organizing fire equipment and gear on the call or off.

An optional shoulder strap is sold separately.

Technical Specification:

Height: 16.5" / 420mm
Length: 17" / 432mm
Width: 9" / 229mm
Weight: 2.27kg
D-rings: 2- 2" and 2- 1"
2 Exterior Pockets
3mm Thick Polypropylene Base
1800 Denier Polyester Body Fabric
Leather Handle Grips

Veto Pro Pac Tool Bags Product Care And Maintenance
Zippered Bags: Keep the Zippers Clean & Lubricated

Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.

Zippered Bags: Protect the Zippers From Sharp Objects and/or Excessive Heat

Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.

Don’t Overstuff the Bag

Overstuffing your tool bag will very likely cause significant stress on the bag and especially the zippers that is above and beyond what the bag was built for and will eventually cause the nylon fabric to stretch beyond its intended use and the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed…proceed with caution!