DeWalt DCD996N 18 Volt XR Li-Ion Cordless Brushless Combi Drill Body Only

The DeWalt DCD996 combi hammer is the successor to the DCD995, with an improved, larger brushless motor which delivers up to 34% more power. DeWalt have improved the airflow to this motor which keeps it cool and at the top of its performance. It features an improved automatic high speed for increasing the users masonry drilling speed.

It has a 3-speed gear box giving you ultimate control over blows-per-minute and revolutions-per-minute. For example, in gear three while in hammer mode you’ll have 38,250 blows per minute while the chuck spins at 2,250rpm.

There's also a newly improved, 3-stage, bae-mounted LED worklight. It has a maximum brightness of 60 lumens, enough to light up a huge work area and even bright enough to use solely as a torch. There's a sturdy switch built-in to the drill base to control the brightness.

FEATURES

All metal nitro-carburised chuck prolongs life as it is stronger and rust resistant
Carbide inserts improve bit gripping strength and helps to minimise dropped bit frustrations
3 speed gearbox for a greater range of applications
Larger brushless motor than previous model gives up to 34% increase in power
Improved air flow to the motor keeps it cool under pressure
Hammer Function increases speed to 2250rpm giving increased productivity
Super bright base-mounted LED worklight with 3 LEDs which give a range from 2.6 to a massive 60 lumens

SPECIFICATION

Voltage: 18v
Power Output (W): 830
Soft Application Max Torque (Nm): 66
Hard Application Max Torque (Nm): 95
Torque Settings: 11 + Drill
Brake Type: Electric
No. of Gears: 3
LED Job Light: Yes / Delay / Base-mounted 
Battery Capacity Indicator: No
Battery Compatibility: 18v Lithium-Ion (XR)
Rotation: Forward / Reverse
Variable Speed Control Trigger: Yes
No Load Speed (RPM) High: 0-2250
No Load Speed (RPM) Med: 0-1500
No Load Speed (RPM) Low: 0-500
Chuck Type: 3-Jaw / Single Sleeve Keyless / All Metal
Chuck Capacity (mm): 1.5-13.0
Drill Capacity: Concrete (mm): 13
Drill Capacity: Metal (mm): 15
Drill Capacity: Wood (mm): 55
Impact Rate (BPM) High: 0-38250
Impact Rate (BPM) Med: 0-25500
Impact Rate (BPM) Low: 0-8600
Overall Length (mm): 213
Net Weight (Approx. Kg) with 1.5/2Ah Batt: 2
Net Weight (Approx. Kg) with 3/4/5Ah Batt: 2.2
Brushless Motor: Yes

NOISE & VIBRATION

Sound Pressure Level (LpA): 97 dB (A)
Sound Power Level (LWA): 108 dB (A)
Sound Uncertainty (K): 3 dB (A)
Drilling Concrete Vibration Emission (ah): 15 m/s²
Drilling Concrete Vibration Uncertainty (K): 3.9 m/s²
Drilling Metal Vibration Emission (ah): 2.5 m/s²
Drilling Metal Vibration Uncertainty (K): 1.5 m/s²

Supplied As:

1x DCD996 Combi Hammer Drill Body Only
1x Belt Hook
1x Multi-Position Side Handle