0151 207 1400
£0.00
Free Delivery Over £100
Over 30 Years Experience
Excellent Customer Service
Dewalt & Makita Service Centre Free Delivery Over £100 Over 30 Years Experience Excellent Customer Service Dewalt & Makita Service Centre
TREND C157X8MMTC PROFILE SCRIBER RAISED BEVEL
Stock Ref:
TREC157X8MMTC
Temporarily Out of Stock
-
Features & SpecificationThe classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets. With the combination type, components are re-arranged on the arbor to cut the profile or the scribe.
Cuts both parts of the joint by reassembly of the tool.
Router table use only. 1/4 inch and 8mm shanks should only be used with a medium or heavy duty router. For certain routers the aperture in the base may need to be enlarged. A workholding device should be used when cutting the scribe cut on the rail ends. The cutting edges should be staggered to each other.
Dimensions:
D=41 mm
C=17 mm
C2=6.35 mm
B=22 mm
A=10 degrees
Shank Diameter=8 mm
Shank Diameter: 8 mm
Grade: TCT
Diameter Metric: 41
Cut Length Metric: 17
Bearing Diameter Metric: 22
Angle: 10
Cuts both parts of the joint by reassembly of the tool.
Router table use only. 1/4 inch and 8mm shanks should only be used with a medium or heavy duty router. For certain routers the aperture in the base may need to be enlarged. A workholding device should be used when cutting the scribe cut on the rail ends. The cutting edges should be staggered to each other.
Dimensions:
D=41 mm
C=17 mm
C2=6.35 mm
B=22 mm
A=10 degrees
Shank Diameter=8 mm
Shank Diameter: 8 mm
Grade: TCT
Diameter Metric: 41
Cut Length Metric: 17
Bearing Diameter Metric: 22
Angle: 10
