0151 207 1400
£0.00
Free Delivery Over £100
Over 30 Years Experience
Excellent Customer Service
Dewalt & Makita Service Centre Free Delivery Over £100 Over 30 Years Experience Excellent Customer Service Dewalt & Makita Service Centre
TREND C204X1/2TC EASYSET PROFILE SCRIBE BEVEL 10DEG
Stock Ref:
TREC204X1/2TC
Temporarily Out of Stock
-
Features & SpecificationThe classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets. With the combination type, components are re-arranged on the arbor to cut the profile or the scribe.
Cuts both parts of the joint by only changing the cutter height. No reassembly of the tool is required so saving time.
Router table use only. 1/4 inch and 8mm shanks should only be used with a medium or heavy duty router. For certain routers the aperture in the base may need to be enlarged. A workholding device should be used when cutting the scribe cut on the rail ends. The cutting edges should be staggered to each other. When using Easyset cutters take several passes.
Dimensions:
D=41 mm
C=17 mm
C2=6.35 mm
B=22 mm
A=10 degrees
Shank Diameter=1/2 inch
Shank Diameter: 1/2
Grade: TCT
Diameter Metric: 41
Cut Length Metric: 17
Bearing Diameter Metric: 22
Angle: 10
Cuts both parts of the joint by only changing the cutter height. No reassembly of the tool is required so saving time.
Router table use only. 1/4 inch and 8mm shanks should only be used with a medium or heavy duty router. For certain routers the aperture in the base may need to be enlarged. A workholding device should be used when cutting the scribe cut on the rail ends. The cutting edges should be staggered to each other. When using Easyset cutters take several passes.
Dimensions:
D=41 mm
C=17 mm
C2=6.35 mm
B=22 mm
A=10 degrees
Shank Diameter=1/2 inch
Shank Diameter: 1/2
Grade: TCT
Diameter Metric: 41
Cut Length Metric: 17
Bearing Diameter Metric: 22
Angle: 10
