Makita DLX2176TJ 18 Volt LXT Li-Ion Cordless Brushless Combi Drill & Impact Driver Twin Pack 2 x 5.0Ah

Two piece kit containing the Makita DHP481 Combi Drill and the new Makita DTD154 Impact Driver. Both brushless tools for higher efficiency and reliability, reduced noise, and longer service life. This kit includes 2x BL1850 5.0Ah batteries for the best run times allowing you to get the job done.

Makita DHP481 18v Brushless Cordless Combi Drill

FEATURES

Brushless BLDC motor specially designed to provide, above all, more work amount on a single full battery charge
Forward/reverse rotation
Single sleeve keyless chuck allows for easy bit installation/removal by one hand
Electric brake
Twin LED job light with afterglow
2 mechanical gears
Battery fuel gauge - 3 lights on = more than 50% battery capacity, 2 lights on = 20 to 50% capacity, 1 light on = less than 20% full battery capacity
Variable speed control by trigger
Best possible ergonomic handle for drill-driver applications
Compact overall length of 205mm
XPT - Extreme Protection Technology

SPECIFICATION

Voltage: 18v
Power Output (W): 640
Soft Application Max Torque (Nm): 60
Hard Application Max Torque (Nm): 115
Torque Settings: 21 + Drill
Brake Type: Electric
No. of Gears: 2
LED Job Light: Yes / Twin / After-glow
Battery Capacity Indicator: Yes
Battery Compatibility: 18v Lithium-Ion (LXT)
Rotation: Forward / Reverse
Variable Speed Control Trigger: Yes
No Load Speed (RPM) High: 0-2100
No Load Speed (RPM) Med: N/A
No Load Speed (RPM) Low: 0-550
Chuck Type: 3-Jaw / Single Sleeve Keyless / All Metal
Chuck Capacity (mm): 13
Screw Capacity: Machine Screw (mm): 6
Screw Capacity: Wood Screw (mm): 10 x 90
Drill Capacity: Concrete (mm): 16
Drill Capacity: Metal (mm): 13
Drill Capacity: Wood (mm): 76
Impact Rate (BPM) High: 0-31500
Impact Rate (BPM) Med: N/A
Impact Rate (BPM) Low: 0-8250
Overall Length (mm): 205
Net Weight (Approx. Kg) with 1.5/2Ah Batt: 2.5
Net Weight (Approx. Kg) with 3/4/5Ah Batt: 2.7
Brushless Motor: Yes
Makita DTD154 18v Brushless Cordless Impact Driver

FEATURES

eXtreme Protection Technology (XPT) offers maximum protection against dust, debris and liquids for optimal performance in extreme conditions
3 stage impact power selection + TEK mode prevents over tightening of fasteners
Super compact with an overall length of only 117mm
One touch sliding chuck for easy bit installation and removal
TEK mode (T-mode) reduces impact power during final stages of fastener seating
Electronic 3-stage impact power selection (Hard/Medium/Soft)
Brushless DC motor with high power to weight and size ratio
Brushless DC motor generates less heat buildup and is ideal for prolonged use in manufacturing / production applications
Battery protection system provides over-discharge, temperature and current protection for enhanced performance, battery cycle life and overall battery life
Twin LED job lights with pre-glow and afterglow features
Ergonomic soft rubber grip design for vibration absorption and comfortable operation

SPECIFICATION

Voltage: 18v
Max Torque (Nm): 175
Brake Type: Electric
LED Job Light: Yes / Twin / Pre-glow / After-glow
Battery Capacity Indicator: No
Battery Compatibility: 18v Lithium-Ion (LXT)
Rotation: Forward & Reverse
Variable Speed Control Trigger: Yes / + 3-Stage Impact Power Selection
No Load Speed (RPM): H: 0-3600 / M: 0-2100 / S: 0-1100
Machine Screw Capacity: M4-M8
Standard Bolt Capacity: M5-M16
High Tensile Bolt Capacity: M5-M14
Coarse Thread Length Capacity (mm): 22-125
Max. Impacts Per Minute (ipm): H: 0-3800 / M: 0-2600 / L: 0-1100
Driving Shank: 1/4" Hex
Overall Length (mm): 117
Net Weight (Kg with 1.5/2Ah Battery): 1.2
Net Weight (Kg with 3/4/5Ah Battery): 1.4
Brushless Motor: Yes

Supplied As:

1x DHP481 Brushless Combi Drill
1x DHP481 Side Handle
1x DHP481 Depth Stop
1x DHP481 Belt Hook
1x DTD154 Brushless Impact Driver
1x DTD154 Belt Hook
2x BL1850 5.0Ah Batteries
1x DC18RC Compact Charger
1x Makpac Connector Case Type 3